OEM Customized China Precision CNC Turning Part Wholesale to Brisbane
Factory making Staineless Shafts and Gears for Auto Parts for Rotterdam Manufacturers Detail: Product Description Item Name machining Quality Assurance ISO9001: 2008 and ISO/TS16949: 2009 and GMC of TUV ( specially for auto industy) certification. Machining Equipment Machining Center / CNC Lathes / Grinding Machines / Milling Machines / Lathes /Wire-cuts / Laser Cuts / CNC Shearing Machines / CNC Bending Machines / etc. Materials Aluminum Alloy: 5052 /6061/ 6063 / 2017...
OEM Customized China Precision CNC Turning Part Wholesale to Brisbane Detail:
Factory making Staineless Shafts and Gears for Auto Parts for Rotterdam Manufacturers Detail:
|Quality Assurance||ISO9001: 2008 and ISO/TS16949: 2009 and GMC of TUV ( specially for auto industy) certification.|
|Machining Equipment||Machining Center / CNC Lathes / Grinding Machines / Milling Machines / Lathes /Wire-cuts / Laser Cuts / CNC Shearing Machines / CNC Bending Machines / etc.|
5052 /6061/ 6063 / 2017 / 7075 / etc.
3602 / 2604 / H59 / H62 / etc.
Stainless Steel Alloy:
303 / 304 / 316 / 412 / etc.
Carbon Steel / Die Steel / etc.
Other Special Materials:
Lucite / Nylon / Bakelite / etc.
We handle many other type of materials. Please contact us if your required material is not listed above.
|Surface Treatment||Blacking,polishing,anodize,chrome plating,zinc plating,nickel plating,tinting|
|Inspection||Hardness tester,Image measuring instrument,Three-dimensional measuring instrument etc.|
|File Formats||Solid Works,Pro/Engineer, AutoCAD(DXF,DWG), PDF,TIF etc.|
1. Our advantages
(1) We are professional precision metal parts manufacturer for over 12 years in shenzhen of China.
(2) Our factory have got through the ISO9001: 2008 and ISO/TS16949: 2009 and GMC of TUV ( specially for auto industy) certification.
(3) We have more than 60 sets all kinds of machines like CNC lathe, CNC milling, stamping machine, drilling machine and grinding machines. But in CNC industry, most manufacture factories only have more than a dozen machines.
(4)higher quality and reasonable price because we have rich-experiece production workers and engineers and strong raw material purchasing team.
(5)professional sale service in time for both before-sale and after-sale by Email, Telephone and face to face.
(6)We always take part in some exhibitions about metal parts industry in the US and Europe (usually in Germany) every year.
2. Our shipments
(1)We can accept a variety of shipment ways like: By express, by air, by sea or other ways.
(2)We can directly send goods to the address which is required by customers. We also can accept to send goods to the freighter company which is appointed by customer.
3. Our sales service
(1)Our professional salesmen will patiently answer all inquiries and questions from customer within 12 hours by email, telephone, face to face and chat tool like trademanager or skype or QQ.
(2)if our salesmen can’t answer or solve customer’s some very professional or important questions right now, they will note well what customer mentioned and tell it to our engineers and manager in time and then reply customers ASAP.
(3)We will advise all feasibility of processing scheme to customers considering to save customers purchasing cost.
4. Our products display ( all of our products are customized as customers’ design drawning and other requirements)
(1)classification as machining process. (CNC milling, CNC turning, Grinding, stamping, die casting, forging, drilling, extrusion profiles and surface treatment. )
(2) classification as product raw material (Aluminum Alloy, Stainless Steel, brass, Steel, etc. )
(3) classification as application of product
(4) classification as surface treatment ( Chrom plated, zincplated, nickleplated, anodizing, polishing, hot-DIP galvanized, electrophoresis, oxidation, coating, etc )
Whatever questions you have, pls feel free to contact us by email or telephone (you can get it in our website). Of course, very welcome to visit us if you interest.
Product detail pictures:
We now have a highly efficient workforce to deal with inquiries from consumers. Our goal is "100% consumer fulfillment by our product or service excellent, selling price & our crew service" and get pleasure from a great popularity among clientele. With lots of factories, we can offer a wide vary of OEM Customized China Precision CNC Turning Part Wholesale to Brisbane, The product will supply to all over the world, such as: Spain, Ottawa, Argentina, We rely on high-quality materials, perfect design, excellent customer service and the competitive price to win the trust of many customers at home and abroad. 95%products are exported to overseas markets.
Emerson TV Repair A17F8MPW Power Supply Repair Kit & No Power, TV Won’t Turn On
Click Here to BUY TV REPAIR PARTS: http://www.shopjimmy.com/catalogsearch/result/?q=A17F8MPW
Known TV Models:
So in this video today we are going to be putting in the SJA17F8MPW Repair Kit into our Power Supply board right here using the Ai7F8MPW board. This repair kit solves a lot of common failures on these boards, most notably when your fuse blows immediately as soon as you apply power and this is due to some shorted components. This kit is also upgraded over the original manufacturers specs, so it should help hopefully stop this from happening again the future.
So the Kit comes like this, all the components are going to be bagged up and they should show their location with the board number. We can go through and pull them all out. It comes with a replacement fuse as well, because yours is most likely blown. A couple resistors and the only piece that actually goes on the under side of the board that can be a bit of a pain to find is this one right here. Everything else is going to be on the top side and its all pretty close to the power.
So when we are replacing the parts in this kit, you are going to want to replace all the parts that are used on your board. Sometimes, certain diodes are not used for example if it is not used on your original you can just leave it out. You will want to replace all the parts that are used, don’t leave anything out. If anything is shorted it could cause the board to blow again. The resistors are really easy, so R602 and 611 are each of these two right here, it doesn’t matter which way they go in and you can just put those in anyway around and it makes no difference. The same goes for R608 this one right here. Once again it can go in either way it doesn’t make any difference. So we are going to start off an replace Q600 which is right here. First off you are going to take your philips head and undue the screw. Once you remove the screw you are going to want to flip the board over and the desolder the component on the other side.
There we go, you will need a little bit of paste, but sometimes you can reuse the stuff that is on there as long as it is not dried out. Otherwise just a little bit of thermal paste on there before you put the new one on. OK, so here we have our new one and if you notice the legs on the original are obviously bent into a different shape, so you are going to have to bend that end to make it fit.
OK, so we have got the original chip off of there and now we are going to take our desolder wick and we are going to clean up those pads. Get them nice and flat and clean for the new one to go on. We got a little residue on the board from cleaning it up, but it is not going to affect anything.
Next we need to put our chip in and these need to go in a certain direction. If you look on the board, it does tell you. There is a solid black line right here and if you look carefully on the chip there is a dark gray band on one side. It can be tough to see, but you do need to get these around so they match. So my dark band and the black line go together like that. Then I will use my tweezers just to try and help hold it in place. You can use your finger, but obviously you risk burning it.
You should be able to kind of wiggle it out, there it goes. Got it loose and out it comes. Now, one thing we want to be careful of is when we put this in, we want to make sure we get it the right way around and if you look at the other ones right here they kind of give you a hint. This little line at this end and there is also a black line right on the diode and that is the way you want to put it in. You can fold it beforehand to make it a little bit easier, so you are going to get it into rough shape.
OK so we have put it in and we bent the pins back to hold it in place, it stops it from falling back through. Now we are going to take some flux and just paint it around the pins and the pad.
So in this video we went through some of the tougher components and the ones that have directional needs and you are going to have to make sure they are going the right way, otherwise you are going to damage the board or the component. These last remaining ones, it does not matter which direction they go in as long as you replace them and put them in the correct spot, that is good to go.
TV Repair Made Easy™
© 2014 ShopJimmy.com, LLC.
CNC Lathe CLOSED DOOR machining quick start recommendation for licensed machinist
Full Technical Details : http://www.mitsubishicarbide.com/EU/West/product/pdf/b196e.pdf
Buy carbide now; www.carbide.ca
For your safety:
Don’t touch breakers and chips without gloves.
Please machine within recommended application range, and exchange expired tools with new parts in advance.
Please use safety cover and use safety glasses.
Use fire prevention.
When attaching chips or spare parts, please use the attached wrench or driver.
When using tools in revolution machine, please make a trial run to check run out, vibration, abnormal sounds etc…
For more Feeds & Speeds on:
316 Stainless Steel
304 Stainless Steel
316LN Stainless Steel
304LN Stainless Steel
Duplex Stainless Steel
410 Stainless Steel
430 Stainless Steel
431 Stainless Steel
17-4PH Stainless Steel
17-7PH Stainless Steel
Visit CARBIDE.TV The Machinist Channel
By Chris 2015-12-23 18:26
Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
By Helen 2016-8-25 16:19