High Performance Precision CNC machinery cnc turning & milling part to Bangkok Importers
1. Feature:cnc part,cnc turning parts,cnc milling parts,cnc router parts, knob,cnc machining part 2.machine:CNC lathe,CNC milling, stamping machine,drilling machine,grinding machines. 3. Finish: color anodized,polishing, zinc plating, nickel plating, chrome plating, powder coating,etc. 4. Packing: Standard export carton or depending on customer’s requirement 5. MOQ: 500pcs and more(depending on the design) 6. Price: reasonable and competitive price as per your drawing Product ...
High Performance Precision CNC machinery cnc turning & milling part to Bangkok Importers Detail:
1. Feature:cnc part,cnc turning parts,cnc milling parts,cnc router parts, knob,cnc machining part
2.machine:CNC lathe,CNC milling, stamping machine,drilling machine,grinding machines.
3. Finish: color anodized,polishing, zinc plating, nickel plating, chrome plating, powder coating,etc.
4. Packing: Standard export carton or depending on customer’s requirement
5. MOQ: 500pcs and more(depending on the design)
6. Price: reasonable and competitive price as per your drawing
|Product Name||cnc milling machine part|
|material we work on||Aluminum Alloy 5052 /6061/ 6063 / 2017 / 7075 / etcBrass Alloy: 3602 / 2604 / H59 / H62 / etc.
Stainless Steel Alloy: 303 / 304 / 316 / 412 / etc.
Steel Alloy: Carbon Steel / Die Steel / etc.
Other Special Materials: Lucite / Nylon / Bakelite / etc.
|process||Forging/ milling /polishing /Painting /anodizing /brushing /casting /assembling/inspecting|
|Quality Assurance||ISO9001: 2008 and ISO/TS16949: 2009 and GMC of TUV ( specially for auto industy) certification.|
|finish||zinc Plated, chrome plated, powder coating, hot-dip galvanized, electrophoresis or others;|
|surface treatment||Polishing, zinc plating, nickel plating or chrome plating, phos plating etc|
|part size||Diameter from 0.5mm to 150mm;|
|tolerance||Can be kept in +/-0.01mm|
|Machining Equipment||Machining Center / CNC Lathes / Grinding Machines / Milling Machines / Lathes / Wire-cuts / Laser Cuts / CNC Shearing Machines / CNC Bending Machines / etc.|
|main products||Precision Machined Parts / CNC Machined Parts /Machinery Spare Parts /Auto Parts / Brass Fittings;Oil Plugs /Oil Level Indicators /Gear Boxes/Speed Reducers ;Kinds of Valves / Bib cocks /Taps /Pipe Fittings/ Tee Fittings / Vent Plugs|
(2) classification as product raw material (Aluminum Alloy, Stainless Steel, brass, Steel, etc. )
(3) classification as application of product
(4) classification as surface treatm aluminum machining part ent ( Chrom plated, zincplated, nickleplated, anodizing, polishing, hot-DIP galvanized, electrophoresis, oxidation, coating, etc )
Product detail pictures:
We attempt for excellence, company the customers", hopes to be the top cooperation team and dominator company for personnel, suppliers and customers, realizes price share and continual marketing for High Performance Precision CNC machinery cnc turning & milling part to Bangkok Importers, The product will supply to all over the world, such as: Kazakhstan , Gabon , Israel , Due to good quality and reasonable prices, our items have been exported to more than 10 countries and regions. We have been looking forward to cooperating with all customers from at home and abroad. Moreover, customer satisfaction is our eternal pursuit.
How to machine and mount a Rollco custom ball scew.
We customize ball screws to suit your requirements – shortening, annealing and working the screws individually.
actuator ball screw
ball bearing screw
ball screw actuators
ball screw bearings
ball screw company
ball screw how
ball screw jack
ball screw jacks
ball screw lead
ball screw manufacturer
ball screw motor
ball screw nut
ball screw on
ball screw slide
ball screw to
linear ball screw
rolled ball screw
Randy, a General Contractor in Dallas, TX and Owner of http://www.RSquaredRenovations.com, demonstrates how to install the plumbing for a bathroom faucet drain. If you are in the Dallas area and are looking to remodel your bathroom, give him a call at 972-998-8544. http://www.UniqueVanities.com
Transcription: Here we have the countertop sitting on the vanity, We’ve bought a p trap installation kit. You can get it at any home improvement store.
It comes with the P trap itself. That’s what we are looking for. The trap holds water in here so you don’t get sewer gas coming up back through.
We have a trap adapter mounted here. Essentially all these fittings are slip joint fittings. There is a plastic washer that has a cone shape. it’s what seals the pipe. It acts like a compression fitting that will seal this pipe onto that fitting there.
These have wings on them so they all need to be hand tightened. You really don’t need a wrench for these to fit together properly. Using a wrench would just cause them to break.
We have a 6 inch tail piece extension that will go on the bottom of the drain that came with our faucet. That slips into here and everything is adjustable. You have about an inch and a half worth of play in both of these up and down. Everything should go together without cutting anything and just by hand tightening everything.
If these parts are a little too long, they do make them in a 12 inch extension if your drain coming out of the wall was lower and you had a higher vanity they come in a 12 inch. You could cut these in two with a hacksaw, just make sure the inside edge is clean so that nothing catches on there.
Here I was able to use everything just how it is. I’ll put the trap in the trap adapter. I’ll put the tail piece extension on. Everything is fitting nice and comfortable. Nothing needs to be at a harsh angle. And then start tightening the fittings right where they are. Once you get everything snug you can go back and tightening everything.
And that’s pretty much how you install a drain. While we are under here we have the shut offs for the hot and cold water for the faucet. The hot side is marked. A common trade practice is the hot is always stubbed out on the left. If for some reason you knew that it wasn’t like your old faucet was reversed, that’s something you need to check before you take it apart so you do know the hot is on the left.
It’s not a big deal, you can always swap these two supply lines underneath here to get back to the proper working order.
We’ve removed the taps off these vales. They have a rubber washer on the bottom. We’ll hand tighten these. Once we feel them tighten up. We can put a wrench on them. Another half a turn. Not too tight. And we’re ready to turn the water on.
Turn it on. Work out the air in the line, let it run a little bit. Check all your fittings for leaks and it’s all dry then your installation is complete. Thanks again for being with us today. We’ll catch you back and show you some more remodeling tips with R Squared Renovations.
By Sara 2016-2-24 14:25
Sales manager is very enthusiastic and professional, gave us a great concessions and product quality is very good,thank you very much!
By Mary 2015-12-11 17:05