100% Original Factory CNC Machining Tight Tolerances and Superior Quality Supply to Belgium
1. Feature:cnc part,cnc turning parts,cnc milling parts,cnc router parts, knob,cnc machining part 2.machine:CNC lathe,CNC milling, stamping machine,drilling machine,grinding machines. 3. Finish: color anodized,polishing, zinc plating, nickel plating, chrome plating, powder coating,etc. 4. Packing: Standard export carton or depending on customer’s requirement 5. MOQ: 500pcs and more(depending on the design) 6. Price: reasonable and competitive price as per your drawing Product Name ...
100% Original Factory CNC Machining Tight Tolerances and Superior Quality Supply to Belgium Detail:
1. Feature:cnc part,cnc turning parts,cnc milling parts,cnc router parts, knob,cnc machining part
2.machine:CNC lathe,CNC milling, stamping machine,drilling machine,grinding machines.
3. Finish: color anodized,polishing, zinc plating, nickel plating, chrome plating, powder coating,etc.
4. Packing: Standard export carton or depending on customer’s requirement
5. MOQ: 500pcs and more(depending on the design)
6. Price: reasonable and competitive price as per your drawing
|Product Name||cnc machining|
|material we work on||Aluminum Alloy 5052 /6061/ 6063 / 2017 / 7075 / etcBrass Alloy: 3602 / 2604 / H59 / H62 / etc.Stainless Steel Alloy: 303 / 304 / 316 / 412 / etc.Steel Alloy: Carbon Steel / Die Steel / etc.Other Special Materials: Lucite / Nylon / Bakelite / etc.|
|process||Forging/ milling /polishing /Painting /anodizing /brushing /casting /assembling/inspecting|
|Quality Assurance||ISO9001: 2008 and ISO/TS16949: 2009 and GMC of TUV ( specially for auto industy) certification.|
|finish||zinc Plated, chrome plated, powder coating, hot-dip galvanized, electrophoresis or others;|
|surface treatment||Polishing, zinc plating, nickel plating or chrome plating, phos plating etc|
|part size||Diameter from 0.5mm to 150mm;|
|tolerance||Can be kept in +/-0.01mm|
|Machining Equipment||Machining Center / CNC Lathes / Grinding Machines / Milling Machines / Lathes / Wire-cuts / Laser Cuts / CNC Shearing Machines / CNC Bending Machines / etc.|
|main products||Precision Machined Parts / CNC Machined Parts /Machinery Spare Parts /Auto Parts / Brass Fittings;Oil Plugs /Oil Level Indicators /Gear Boxes/Speed Reducers ;Kinds of Valves / Bib cocks /Taps /Pipe Fittings/ Tee Fittings / Vent Plugs|
(2) classification as product raw material (Aluminum Alloy, Stainless Steel, brass, Steel, etc. )
(3) classification as application of product
(4) classification as surface treatm aluminum machining part ent ( Chrom plated, zincplated, nickleplated, anodizing, polishing, hot-DIP galvanized, electrophoresis, oxidation, coating, etc )
Product detail pictures:
To become the stage of realizing dreams of our employees! To build a happier, additional united and additional experienced team! To reach a mutual gain of our clients, suppliers, the society and ourselves for 100% Original Factory CNC Machining Tight Tolerances and Superior Quality Supply to Belgium, The product will supply to all over the world, such as: Benin, Iceland, Australia, Regarding quality as survival, prestige as guarantee, innovation as motive force, development along with advanced technology, our group hopes to make progress together with you and make untiring efforts for the bright future of this industry.
Investment casting: http://robot.fanucamerica.com/Products/Robots/part-transfer-robots.aspx
Urschel Laboratories is the global leader in the design and manufacture of precision high-speed size reduction machinery. With over 50 models offered, all machines are made to exacting standards at Urschel’s advanced manufacturing facility in Chesterton, Indiana.
Urschel developed this robotic system to utilize FANUC’s R-2000iC/165F robot to perform an investment casting process. This process typically takes five days to build the wax shell for most molds, running through the process once each day then drying overnight. Part Programs for the system are created on an easy-to-use PC application, and are easily modified with standard PC methods such as copy & paste and drop & drag of process steps. Part Program sections or steps are easily copied from one Part Program to another to aid in creating Part Programs, thus reducing Program creation time. One robot TP program runs all of the parts. Part Programs are a parametric based for hundreds of different part types, allowing operators to change the part type, approach height, angle, rotational speed, and other parameters with just a few key strokes.
In day 1 of the casting process, the FANUC R-2000iC robot loads the wax hanger, then moves it to the first slurry tank. The robot dips the hanger into the tank at 45 degrees in order to ensure complete part coverage. On the first day, the thinnest slurry and the finest ceramic sand are used. Once the robot has removed the mold and rotated it so that slurry completely covers all cavities, it moves the mold to a rain fall station where it again rotates the mold at an angle. Once the rain fall process is complete, the robot removes it, hangs it to dry, and the day 1 process is finished.
Day 2 of the process, again, starts with the FANUC R-2000iC robot loading the wax hanger. In each day’s run – except the first day – the robot goes thru a “Dust Off” procedure where the mold is rotated at a higher RPM to release any loose ceramic dust. This procedure is a good demonstration of a Continuous Turn Axis. The robot then dips the part into a pre-wet tank before dipping it into a slurry tank, again, at a 45-degree angle. Since wax parts should not stop rotating while wet with slurry (with some exceptions) a 7th axis was installed on the robot’s end of arm tooling. The system is equipped with FANUC Dual Check Safety positional check with DCS I/O. These safety features from FANUC, along with built-in safety scanners, reduce downtime due to better access to the Slurry Tanks. If the Operator occupies a Slurry Tank zone, the DCS-equipped robot will stop and wait for the operator to clear the area before continuing with its cycle. Once the mold is finished in the slurry, it again moves to the rain fall station, then back to it’s hanger station upon completion.
In day 3 of the process, the robot loads the hanger and again moves to the slurry station to dip the mold at a 45-degree angle. This intuitive, easy to operate system from Urschel, along with FANUC robots, have greatly enhanced the investment casting process for Urschel by reducing maintenance downtime and system idle time due to better access to the slurry tanks and reduced part program development and modification time. Finally, the robot dips the mold into a fluidizer bed.
To learn more about Urschel and their innovative products and technologies, please visit http://www.urschel.com. Contact FANUC America today to discover more possibilities of increased productivity and profitability through robotic automation. To learn more, please visit http://www.fanucamerica.com.
This is the first cast that I have made of a colony built by this species of ant, which I have identified as belonging to the species Aphaenogaster treatae. I usually prefer to identify ants by their common name for the videos but as far as I can tell there is no common name for this species. At first glance they look similar to other ant types. I had to use a microscope to view the smaller features on the ants and a taxonomic key in order to identify the ant species. Above ground, these ants generally make a single colony entrance which is easy to find early on by the small pile of discarded dirt surrounding the colony. Eventually, rain washes the dirt away and all that remains is the small hole of the colony entrance.
The basic structure of this colony is a single entrance tunnel, leading to several wide chambers stacked closely on top of each other, then a long tunnel leading to a wider pad-like chamber at the deepest point. The cast is fairly small compared to the others that I have done, but is a great illustration of the uniqueness in colony structure that each type of ant creates. Finding new ant species and discovering their colony structure is what really interests me in doing this, and hopefully that comes across to you in the videos that I post.
The finished cast is displayed upside down from its natural orientation and is 6.5″ deep and 8″ at its widest.
More pictures of this cast at http://www.anthillart.com/castings/066/
By Karl 2016-10-19 18:13
Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
By Chris 2015-12-23 18:26